manualshive.com logo in svg

Dell OptiPlex 5480 All-in-One, Service Manual

Share
Download
Dell OptiPlex 5480 All-in-One Service Manual Download Page 79

8. Remove the 

system board

.

9. Remove the 

bottom cover

.

10. Remove the 

rear-I/O bracket

.

11. Remove the 

speakers

.

About this task

The following image provides a visual representation of the antenna modules removal procedure.

Steps

1. Remove the antenna cables from the routing guides on the display-assembly base.
2. Remove the two screws (M2x2.5) that secure the antenna modules to the middle frame.
3. Carefully peel the copper foil that secures the antenna cables to the middle frame.
4. Lift the antenna modules off the middle frame.

Installing the antenna modules

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image provides a visual representation of the antenna modules installation procedure.

Removing and installing components

79

Summary of Contents for OptiPlex 5480 All-in-One







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands