Steps
1. Align the screw holes on the rear-I/O bracket with the screw holes on the display-assembly base.
2. Replace the threescrews (M3x5) that secure the rear-I/O bracket to the display-assembly base.
3. Route the power-supply cable through the routing guide on the rear-I/O bracket.
4. Align the screw hole on the power-supply socket with the screw hole on the rear-I/O bracket.
5. Replace the screw (M3x5) that secure the power-supply socket to the rear-I/O bracket.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
5. Install the
6. Follow the procedure in
After working inside your computer
.
System board
Removing the system board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
NOTE:
Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup
program after you replace the system board.
62
Removing and installing components
