Installing the pop-up camera
1
Follow the procedure in
After working inside your computer
.
2
To install the pop-up camera module:
a Replace the camera module along with the camera cable in the slot on the pop-up camera assembly [1].
b Snap the pop-up camera assembly in place to the tab [2].
3
To install the pop-up camera bezel:
a Align the screw slots on the pop-up camera bezel with the screw slots on the pop-up camera assembly [1].
b Replace the three screws (M3x5) that secure the pop-up camera bezel to the pop-up camera assembly [2].
c To retract the pop-up camera, press the top of the pop-up camera assembly[3].
50
Removing and Installing components
Summary of Contents for OptiPlex 5260
Page 1: ...Dell OptiPlex 5260 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 57: ...4 Pry and lift the base cover off the middle frame Removing and Installing components 57 ...
Page 61: ...b Slide the PSU and lift it away from the chassis Removing and Installing components 61 ...
