Dell OptiPlex 390 Mini-Tower Owner'S Manual Download

Page: 91 / 92

Contacting Dell

NOTE: If you do not have an active Internet connection, you can find contact
information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options.

Availability varies by country and product, and some services may not be

available in your area. To contact Dell for sales, technical support, or customer

service issues:

1. Visit support.dell.com.
2. Select your support category.
3. If you are not a U.S. customer, select your country code at the bottom of the

page, or select All to see more choices.

4. Select the appropriate service or support link based on your need.

Summary of Contents for OptiPlex 390 Mini-Tower





























































































Search results

Summary of Contents for OptiPlex 390 Mini-Tower

Reviews:

Related manuals for OptiPlex 390 Mini-Tower

Brands by name

Popular brands

Dell OptiPlex 390 Mini-Tower, Owner'S Manual

Search results

Summary of Contents for OptiPlex 390 Mini-Tower

Reviews:

Related manuals for OptiPlex 390 Mini-Tower

Brands by name

Popular brands