Dell OptiPlex 390 Mini-Tower Owner'S Manual Download

Page: 61 / 92

System Configuration

•

COM4

NOTE: The operating system may allocate resources even
though the setting is disabled.

SATA Operation

Allows you to configure the operating mode of the integrated
hard drive controller.

•

Disabled = The SATA controllers are hidden

•

ATA = SATA is configured for ATA mode

Drives

Allows you to enable or disable the various drives on-board:

•

SATA-0

•

SATA-1

•

SATA-2

•

SATA-3

Smart Reporting

This field controls whether hard drive errors for integrated
drives are reported during system startup. This option is
disabled by default.

USB Configuration

Allows you to enable or disable the integrated USB controller
for:

•

Boot Support

•

Rear Dual USB Ports

•

Front USB Ports

•

Rear Quad USB Ports

Miscellaneous
Devices

Allows you to enable or disable the Wi-Fi Radio.

Security

Administrative
Password

Allows you to set restricted access to system setup program.
This option is not set by default.

System Password

Displays the current status of the system's password security

feature and allows a new system password to be assigned and

verified.
This option is not set by default.

Summary of Contents for OptiPlex 390 Mini-Tower





























































































Search results

Summary of Contents for OptiPlex 390 Mini-Tower

Reviews:

Related manuals for OptiPlex 390 Mini-Tower

Brands by name

Popular brands

Dell OptiPlex 390 Mini-Tower, Owner'S Manual

Search results

Summary of Contents for OptiPlex 390 Mini-Tower

Reviews:

Related manuals for OptiPlex 390 Mini-Tower

Brands by name

Popular brands