manualshive.com logo in svg

Dell OptiPlex 3240, Owner'S Manual, Page: 47 / 57

Share
Download
Dell OptiPlex 3240 Owner'S Manual Download Page 47

Option

Description

Server IP Address

This option specifies the primary static IP address of the Cloud Desktop Server with 
which the client software communicates. The default Server IP Address is 

255.255.255.255

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

Server Port

This option specifies the primary IP port of the Cloud Desktop with which the client 
software communicates. The default Server Port value is 06910.

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

Client Address 
Method

This option specifies how the client obtains its IP address. The options are:

•

Static IP - Uses the static IP address

•

DHCP - Obtains IP address using Dynamic Host Configuration Protocol(DHCP). 
This option is selected by default.

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

Client IP Address

This option specifies the static IP address of the client. The default IP Address is 

255.255.255.255

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

Client Subnet 
Mask

This option specifies the subnet mask IP address of the client. The default IP 
Address is 

255.255.255.255

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

Client Gateway

This option specifies the gateway IP address of the client. The default IP Address is 

255.255.255.255

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

DNS IP address

This option specifies the DNS IP address of the client. The default IP Address is 

255.255.255.255

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop.

Domain Name

This option specifies the domain name of the client.

NOTE: This option is relevant only when the Integrated NIC control in the 
System Configuration group is set to Enable with Cloud Desktop, and when 
the client address method is set to static IP.

47

Summary of Contents for OptiPlex 3240


























































Reviews:

No comments