manualshive.com logo in svg

Dell OptiPlex 3240, Owner'S Manual, Page: 45 / 57

Share
Download
Dell OptiPlex 3240 Owner'S Manual Download Page 45

POST behavior screen options

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This 
option is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option is 
enabled by default.

Fastboot

Allows you to speed up the boot process by bypassing some of the compatibility 
steps. The options are:

•

Minimal

•

Through (default)

•

Auto

Virtualization support screen options

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology (default).

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional 
hardware capabilities provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.

Wireless screen options

Option

Description

Wireless Device 
Enable

Allows you to enable or disable the internal wireless devices.

•

WLAN/WiGig

•

Bluetooth

All the options are enabled by default.

Maintenance screen options

Option

Description

Service Tag

Displays the Service Tag of your computer.

45

Summary of Contents for OptiPlex 3240


























































Reviews:

No comments