Cable holder
Removing cable holder
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
3
To remove cable holder:
a Disconnect and unroute VGA and SATA ODD cables from the system board [1]
b Remove the M2x2.5 screws that secure VGA and SATA ODD cables on the computer [2].
c Lift the cable holder away from the computer [3].
Installing cable holder
1
Route the VGA and SATA ODD cable the slot on the chassis.
2
Replace the M2x2.5 screws to secure the VGA and SATA ODD cable on the computer.
3
Connect the VGA and SATA ODD cables to the connector on the system board.
4
Install the:
a
b
c
d
Removing and installing components
15