Installing easel stand
1
Position the stand to allow the metal plate tab to align with the notches on the back cover.
2
Replace the M4x7 screws to secure the stand to the computer.
3
Place the cover on the metal plate until snaps in.
4
Follow the procedure in
After working inside your computer
.
Optical drive
Removing optical drive
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
.
3
To remove the optical drive:
a Using a plastic scribe push the metal tab that is beneath the cover to release the optical drive [1].
b Remove the optical drive from the computer [2].
Installing optical drive
1
Insert the optical drive into the slot, until it snaps in.
2
Install the
.
3
Follow the procedure in
After working inside your computer
.
10
Removing and installing components
