Back cover
Removing back cover
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
Pry the edges and remove the back cover optical drive slot.
NOTE:
On system with POGO Intrusion feature; after replacing the system board, it is very important that technicians
reassemble the back cover prior booting the system up to the SMMM service menu. The POGO intrusion feature can
only be enabled when the system is in service mode at SMMM. Once exited, the SMMM can no longer be triggered and
a replacement system board would be required.
Installing back cover
1
Align the notches on the back cover to the holes on the computer.
2
Press the back cover until it snaps on the computer.
3
Install the:
a
b
4
Follow the procedure in
After working inside your computer
.
Removing and installing components
11
