Installing the Back Cover
1.
Place the back cover on the computer.
2.
Press at the corners of the back cover to secure it to the computer.
3.
Install:
a) VESA stand
b) stand cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Disk Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) stand cover
b) VESA stand
c) back cover
3.
Remove the screw that secures the optical disk drive to the computer and disconnect the cable from the optical
disk drive. Slide the optical disk drive out of the computer.
13
Summary of Contents for OptiPlex 3011 AIO
