Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
13
Chapter 2
Powering Up and Configuring Policy
Manager Hardware
The Policy Manager server requires initial port configuration. Its backplane contains three ports.
Server Port Overview
Figure 1:
Policy Manager Backplane
The ports in the figure above are described in the following table:
Table 1:
Device Ports
Key
Port
Description
A
Serial
Configures the ClearPass Policy Manager appliance initially, via hardwired terminal.
B -
eth0
Management
(gigabit Ethernet)
Provides access for cluster administration and appliance maintenance via web
access, CLI, or internal cluster communications.
Configuration required.
C -
eth1
Data (gigabit
Ethernet)
Provides point of contact for RADIUS, , Web Authentication and other data-
plane requests.
Configuration optional. If not configured, requests redirected to the management
port.
Summary of Contents for Networking W-ClearPass Policy Manager 6.0
