Dell Networking S6000 System, Reference Manual

Page: 509 / 1510

Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Related
Commands show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
hardware watchdog
To trigger a reboot and restart the system, set the watchdog timer.
S6000
Syntax
hardware watchdog stack-unit {<0-5> | all}
Defaults Enabled.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Usage
Information This command enables a hardware watchdog mechanism that automatically
reboots an Dell Networking OS switch/ router with a single unresponsive unit. This
behavior is a last-resort mechanism intended to prevent a manual power cycle.
Debugging and Diagnostics
509