Dell Networking S6000 System, Reference Manual

Page: 508 / 1510

cpu party-bus
statistics Enter the keywords
cpu party-bus statistics
to clear
the management statistics.
stack-port Enter the keywords
stack-port
then the port number of
the stacking port to clear the statistics of the particular
stacking port. The range is 0 to 127 for the S6000.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Related
Commands show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
S6000
Syntax
clear hardware system-flow layer2 stack-unit number port-set 0–
0 counters
Parameters
stack-unit
number
Enter the keywords
stack-unit
then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data. The
range is 0 to 5 for the S6000.
port-set 0–0
counters
Enter the keywords
port-set
along with a port-pipe
number, then the keyword counters to clear the system-flow
counters on the selected port-pipe. The range is 0 to 0 for
the S6000.
Defaults none
508
Debugging and Diagnostics