Field
Description
Network
Displays the destination network prefix of each BGP route.
Next Hop
Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Metric
Displays the BGP route’s metric, if assigned.
LocPrf
Displays the BGP LOCAL_PREF attribute for the route.
Weight
Displays the route’s weight.
Path
Lists all the ASs the route passed through to reach the
destination network.
Example
Dell#show ip bgp
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf
Weight Path
*> 55.0.0.0/24
172.16.0.2 0 200 i
*> 66.0.0.0/24
172.16.0.2 0 200 i
Related
Commands
— controls the number of network prefixes received.
show ip bgp cluster-list
View BGP neighbors in a specific cluster.
S6000
Syntax
show ip bgp [vrf
vrf-name
] [
ipv4 unicast
] cluster-list
[
cluster-id
]
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
and then the name of
the VRF to view cluster information of BGP neighbors
corresponding to that VRF.
ipv4 unicast
(OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format.
The range is 1 — 4294967295.
Border Gateway Protocol
397
Summary of Contents for Networking S6000 System
