48
SNMP Traps
This chapter lists the traps sent by the Dell Networking operating software. Each trap is listed by the fields
Message ID, Trap Type, and Trap Option.
Message ID
Trap Type
Trap Option
COLD_START
SNMP
COLDSTART
%SNMP-5-SNMP_COLD_START: SNMP COLD_START trap sent.
WARM_START
SNMP
WARMSTART
COPY_CONFIG_COMPLETE
SNMP
NONE
SNMP Copy Config Command Completed
LINK_DOWN
SNMP
LINKDOWN
%IFA-1-PORT_LINKDN: changed interface state to
down:%d
LINK_UP
SNMP
LINKUP
%IFA-1-PORT_LINKUP: changed interface state to up:
%d
AUTHENTICATION_FAIL
SNMP
AUTH
%SNMP-3-SNMP_AUTH_FAIL: SNMP Authentication
failed.Request with invalid community string.
EGP_NEIGHBOR_LOSS
SNMP
NONE
OSTATE_DOWN
SNMP
LINKDOWN
%IFM-1-OSTATE_DN: changed interface state to down:
%s
%IFM-5-CSTATE_DN:Changed interface Physical state
to down: %s
OSTATE_UP
SNMP
LINKUP
%IFM-1-OSTATE_UP: changed interface state to up:%s
%IFM-5-CSTATE_UP: Changed interface Physical state
to up: %s
RMON_RISING_THRESHOLD
SNMP
NONE
%RPM0-P:CP %SNMP-4-RMON_RISING_THRESHOLD: RMON
rising threshold alarm from SNMP OID <oid>
RMON_FALLING_THRESHOLD
SNMP
NONE
1380
SNMP Traps
Summary of Contents for Networking S6000 System
