About this Guide
This document is intended as an installation guide to get new systems up and running and ready for configuration.
You can use a Dell N20xx or N30xx either as a switch or a port extender for a C9010 switch. You can use the N20xx or N30xx series
devices as a switch if you use the Dell Networking OS version 6.3(0.16) or later. If you use a N20xx or N30xx series device as a port
extender for the C9010, install the Dell Networking OS version 9.11(0.0) or later. For converting the switch, purchase a rapid access node
conversion license from Dell. For more information about installing the Dell Networking OS version 9.11(0.0) or version 6.3(0.16) on an
N20xx or N30xx system, see the
Dell Networking OS Conversion Guide for the N20xx/N30xx Series
.
For complete installation, configuration, and update information, see the following documents at
www.dell.com/support
.
Table 1. N20xx/N30xx Documentation
Information
Documentation
Software configuration
•
Dell Networking Configuration Guide for the C9000 Series
—for
Dell Networking OS 9.11(0.0) or later
•
Dell Networking N-Series User Guide
—for Dell Networking OS
6.3(0.16)
Command-line interface
•
Dell Networking Command-Line Reference Guide for the
C9000 Series
—for Dell Networking OS 9.11(0.0) or later
•
Dell Networking CLI Reference Guide
—for Dell Networking OS
6.3(0.16)
Installing Dell Networking OS version 9.11(0.0) or version 6.3(0.16)
on an N20xx or N30xx system
Dell Networking OS Conversion Guide for the N20xx/N30xx Series
Latest updates
Dell Networking C9010, C1048P, and N20xx/N30xx Series Release
Notes
1
About this Guide
3