Getting Started Guide
5
Introduction
This document provides basic information about the Dell Networking
N1100-ON Series switches, including how to install a switch and perform the
initial configuration. For information about how to configure and monitor
switch features, refer to the
User Configuration Guide
, which is available on
the Dell Support website at
dell.com
/
support
. See the Support website for
the latest updates on documentation and firmware.
NOTE:
Switch administrators are strongly advised to maintain Dell Networking
switches on the latest version of the Dell Networking Operating System (DNOS).
Dell Networking continually improves the features and functions of DNOS based on
feedback from you, the customer. For critical infrastructure, pre-staging of the new
release into a non-critical portion of the network is recommended to verify network
configuration and operation with the new DNOS version.
N1100-ON Series Hardware Overview
This section contains information about device characteristics and modular
hardware configurations for the Dell Networking N1100-ON Series switch.
Power Consumption for N1100-ON Series PoE Switches
Table 1-1 describes the power consumption for N1100-ON Series PoE
switches. The PoE power budget is 60W for the N1108P-ON, 185W for the
N1124P-ON, and 370W for the N1148P-ON.
Table 1-1. Power Consumption for N1100-ON Series PoE Switches
Model
Input Voltage Power Supply
Configuration
Maximum
Steady Current
Consumption (A)
Maximum
Steady
Power (W)
N1108P-ON 100V/60Hz
Main PSU
0.95A
88.64W
110V/60Hz
Main PSU
0.87A
88.43W
120V/60Hz
Main PSU
0.80A
88.22W
220V/50Hz
Main PSU
0.49A
89.28W
240V/50Hz
Main PSU
0.45A
89.70W
