Dell N1100-ON, Reference Manual

Page: 560 / 2332

Layer 2 Switching Commands
560
lldp transmit-tlv
Use the lldp transmit-tlv command in Interface Configuration mode to
specify which optional type-length-value settings (TLVs) in the AB basic
management set will be transmitted in the LLDPDUs. To remove an optional
TLV, use the no form of this command.
Syntax
lldp transmit-tlv [ sys-desc ][ sys-name ][ sys-cap ][ port-desc ]
no lldp transmit-tlv [ sys-desc ][ sys-name ][ sys-cap ][ port-desc ]
• sys-name — Transmits the system name TLV. This is the configured host
name for the system.
• sys-desc — Transmits the system description TLV
• sys-cap — Transmits the system capabilities TLV
• port-desc — Transmits the port description TLV
Default Configuration
By default, the port-desc and sys-name TLVs are transmitted.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The string configured by the hostname command is transmitted by in the sys-
name TLV.
Use the
show lldp remote-device all command to see the advertised LLDP
neighbor information.
Example
The following example shows how to include the system description TLV in
local data transmit.
console(config-if-Gi1/0/3)#lldp transmit-tlv sys-desc