Dell N1100-ON, Reference Manual

Page: 352 / 2332

Layer 2 Switching Commands
352
DHCPv6 Snooping Commands
Dell EMC Networking N1100-ON/N1500/N2000/N2100-
ON/N3000/N3100-ON/N4000 Series Switches
This section explains the following commands:
clear ipv6 dhcp snooping binding
Use the clear ipv6 dhcp snooping binding command to clear all IPv6 DHCP
Snooping entries.
Syntax
clear ipv6 dhcp snooping binding {* | interface interface-id}
• *—Clears all snooping bindings.
• interface-id—Clears all snooping bindings on a specified physical
interface.
Default Configuration
This command has no default configuration.
clear ipv6 dhcp snooping binding ipv6 dhcp snooping verify mac-address
clear ipv6 dhcp snooping binding ipv6 verify binding
ipv6 dhcp snooping ipv6 verify source
ipv6 dhcp snooping vlan show ipv6 dhcp snooping
ipv6 dhcp snooping binding show ipv6 dhcp snooping binding
ipv6 dhcp snooping database show ipv6 dhcp snooping database
ipv6 dhcp snooping database write-delay show ipv6 dhcp snooping interfaces
ipv6 dhcp snooping limit show ipv6 dhcp snooping statistics
ipv6 dhcp snooping log-invalid show ipv6 source binding
ipv6 dhcp snooping trust show ipv6 verify
– show ipv6 verify source