Dell N1100-ON, Reference Manual

Page: 1838 / 2332

Switch Management Commands
1838
• profile-compellent-nas, the interface configuration, used when
connecting the switch to a Dell Compellent NAS.
Commands in this Section
This section explains the following commands:
macro name
Use the macro name command in Global Configuration mode to create a
user-defined macro. Use the no form of the command to delete a macro.
Syntax
macro name name
no macro name name
• name—The name of the macro. A macro name can consist of any
printable characters, including blanks and excluding question marks. A
macro name may be up to 31 characters in length. Embed the name in
quotes if a blank is desired in the name. Use the no form of the
command to delete a macro.
Default Configuration
The following macros are defined by default and may not be deleted or
altered:
macro name macro apply
macro global apply macro trace
macro global trace macro description
macro global description show parser macro
Macro Context Name Service
global profile-global Set DSCP mappings and enable
RSTP.