Dell N1100-ON, Reference Manual

Page: 1824 / 2332

Switch Management Commands
1824
Application Deployment
This section contains commands to manage Dell-supplied or end-user
generated applications.
Commands in this Section
This section explains the following commands:
application install
Use the application install command to install or remove an application.
Syntax
application install filename [start-on-boot] [auto-restart] [cpu-sharing
percent] [max-megabytes max-megabytes]
no application install filename
• filename — Name of the file containing the executable or script that is
started as a Linux process for the application.
• start-on-boot — Start the application every time the switch boots up.
Takes affect on the subsequent reboot after set. Omit this keyword from
the command to disable starting application at boot time.
• auto-restart — Automatically restart the application’s process(es) if they
stop running. Omit this keyword from the command to disable
automatic restart of the application.
• cpu-sharing — CPU share allocated to this application. Expressed as a
percentage between 0 and 99. If 0 is specified, the application
process(es) are not limited. If this keyword is not specified, the default
value is used. The default is 0.
application install application stop
application start show application