Back to Contents Page
Heat Sink Assembly
Dell™ Latitude™ Z600 Service Manual
Removing the Heat Sink Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
hinge covers
from the computer.
4.
Remove the
access panel
from the computer.
5.
Remove the
system board
from the computer and place the system board on a clean, flat work surface.
6.
Carefully remove the tape that covers the heat sink fan cables and their connectors on the system board.
7.
Disconnect the heat sink fan cables from their connectors on the system board.
8.
Flip the system board upside-down.
9.
Remove the screws that secure the heat sink assembly to the system board.
10.
Remove the heat sink assembly from the system board.
Replacing the Heat Sink
To replace the heat sink, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Summary of Contents for Latitude Z
Page 6: ...Back to Contents Page ...
Page 28: ...Back to Contents Page ...
