a.
NOTE: This is applicable only for non touch systems.
b.
NOTE: This is applicable only for touch systems.
c.
d.
e.
4.
After working inside your system
.
eDP cable
Removing the eDP cable
1.
Before working inside your computer
2.
Remove the:
a.
b.
c.
d.
NOTE: This is applicable only for non touch systems.
e.
3.
Disconnect the camera cable from the camera [1].
4.
Peel the camera cable adhesive and unroute the eDP and display cable from the routing clips on the display assembly [2, 3].
5.
Remove the eDP cable from the display assembly.
Figure 3. Removing the eDP cable for non touch systems
35
