Dell Latitude E5540 Owner'S Manual Download

Page: 51 / 63

Table 11. Wireless

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless
switch. The options are:

Latitude
E5440

• WWAN
• WLAN
• WiGig
• Bluetooth

All the options are enabled by default.

Latitude
E5540

• WLAN
• WiGig
• Bluetooth

All the options are enabled by default.

Wireless Device Enable

Allows you to enable or disable the internal wireless devices.

Latitude
E5440

• WWAN
• WLAN / WiGig
• Bluetooth

All the options are enabled by default.

Latitude
E5540

• WLAN / WiGig
• Bluetooth

All the options are enabled by default.

Table 12. Maintenance

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.

Table 13. System Logs

Option

Description

BIOS Events

Allows you to view and clear the System Setup (BIOS) POST events.

Thermal Events

Allows you to view and clear the System Setup (Thermal) events.

Power Events

Allows you to view and clear the System Setup (Power) events.

Summary of Contents for Latitude E5540
































































Search results

Summary of Contents for Latitude E5540

Reviews:

Related manuals for Latitude E5540

Brands by name

Popular brands

Dell Latitude E5540, Owner'S Manual

Search results

Summary of Contents for Latitude E5540

Reviews:

Related manuals for Latitude E5540

Brands by name

Popular brands