Dell Latitude E5540 Owner'S Manual Download Page 43 | Manualshive

Page: 43 / 63

Dell Latitude E5540 Owner'S Manual Download Page 43

Option

Description

By default, all the options are checked.

You can also deselect any option or

change the boot order.

Boot List Option

Allows you to change the boot list option.

• Legacy
• UEFI

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the

Enable Legacy

Option ROMs

is unchecked.

Date/Time

Allows you to change the date and time.

Table 3. System Configuration

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options
are:

• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.

Parallel Port

Allows you to configure the parallel port on the docking station. The
options are:

• Disabled
• AT: This option is enabled by default.
• PS2
• ECP

Serial Port

Allows you to configure the integrated serial port. The options are:

• Disabled
• COM1: This option is enabled by default.
• COM2
• COM3
• COM4

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The
options are:

• Disabled
• AHCI
• RAID On: This option is enabled by default.

Drives

Allows you to configure the SATA drives on board. All drives are enabled
by default. The options are:

• SATA-0
• SATA-1

43

«
...
41
42
43
44
45
...
»

Summary of Contents for Latitude E5540
































































Reviews:

No comments