Dell Latitude CS, Service Manual

Page: 25 / 45

16 Dell Latitude CS Portable Computers Service Manual
127,&(6DPVXQJ/&'SDQHOVKDYHWZR0[PPVFUHZVORFDWHGRQ
WKHULJKWVLGHRIWKHSDQHO5HPRYHWKHVHVFUHZVEHIRUHURWDWLQJWKH
SDQHO
6. Rotate the top of the LCD panel away from the display-assembly top cover.
7. From the back side of the LCD panel, carefully disconnect the display-
assembly interface cable connector.
8. Disconnect the display-assembly inverter wire connector from the bottom
of the inverter (see Figure 11 for a Sharp LCD panel or Figure 12 for a
Samsung LCD panel).
The female connector on the interface wire is keyed to fit into the male
connector on the system board one way only.
127,&(7KH/&'SDQHOLVDQGOHLWFDUHIXOO\
9. Lift the LCD panel out of the display-assembly top cover.
10. Install the display-assembly interface wire, LCD panel, and inverter wire.
127,&(%HIRUHUHPRYLQJWKHSDFNLQJEH]HOIURPDQHZ6KDUS/&'
SDQHOUHDG´5HPRYLQJWKH3DFNLQJ%H]HORQD1HZ6KDUS/&'
3DQHOµRQSDJH 6DPVXQJ/&'SDQHOVGRQRWUHTXLUHDSDFNLQJ
EH]HO
11. Install the display-assembly top cover and display-assembly bezel.
12. Turn the computer over.
13. Reinstall the main battery in the main battery compartment.
Installation of the new LCD panel is completed.
5HSODFLQJD6KDUS/&'3DQHOZLWKD6DPVXQJ/&'
3DQHORU5HSODFLQJD6DPVXQJ/&'3DQHOZLWKD
6KDUS/&'3DQHO
1. Ground yourself by touching the unpainted metal surface of the I/O panel
on the back of the computer.
2. Remove the status indicator panel (see Figure 9).
3. Remove the display assembly (see Figure 10).
4. Remove the old display-assembly top cover and display-assembly bezel
(see Figure 11 for a Sharp LCD panel or Figure 12 for a Samsung LCD
panel).
5. Remove the inverter (see Figure 11 for a Sharp LCD panel or Figure 12 for a
Samsung LCD panel).