Dell Latitude C840 Service Manual Download

Page: 11 / 78

Hard Drive and Fixed Optical Drive: Dell Latitude C840 Service Manual

Back to Contents Page

Hard Drive and Fixed Optical Drive

Dell™ Latitude™ C840 Service Manual

Hard Drive

Fixed Optical Drive

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage

due to servicing that is not authorized by Dell is not covered by your warranty.

Hard Drive

NOTICE:

Disconnect the computer and attached devices from the electrical outlet and remove

any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching unpainted metal on the computer.

NOTICE:

The hard drive is very sensitive to shock. Handle the drive by its edges (do not

squeeze the top of the case), and avoid dropping it.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/C840/C840_SERVICE_MANUAL/hdd.htm (1 of 4)6/21/2004 1:36:11 AM

Summary of Contents for Latitude C840















































































Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands

Dell Latitude C840, Service Manual

Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands