Dell Latitude C840 Service Manual Download

Page: 13 / 78

Hard Drive and Fixed Optical Drive: Dell Latitude C840 Service Manual

Fixed Optical Drive

NOTICE:

Disconnect the computer and attached devices from the electrical outlet and remove

any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching unpainted metal on the computer.

captive screw

pull tab

Removing the Fixed Optical Drive

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Loosen the captive screw on the bottom of the computer.

3. Turn the computer over (to keep the captive screw from interfering with the pull tab) and pull

out the pull tab.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/C840/C840_SERVICE_MANUAL/hdd.htm (3 of 4)6/21/2004 1:36:11 AM

Summary of Contents for Latitude C840















































































Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands

Dell Latitude C840, Service Manual

Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands