3. Adhere the adhesive tape to cover the WWAN LTE antenna module.
4. Adhere the graphite mylar to the back of the keyboard.
5. Connect the keyboard FFC to the connector on the touchpad.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
.
5. Install the
6. Install the
.
7. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Palm-rest
Prerequisites
Before working inside your computer
.
2. Remove the
3. Remove the
.
4. Remove the
.
5. Remove the
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
.
11. Remove the
.
12. Remove the
NOTE:
The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
13. Remove the
14. Remove the
.
15. Remove the
.
Removing and installing components
53
Summary of Contents for Latitude 9330
