Dell Latitude 9330 Service Manual Download Page 49

Page: 49 / 79

2. Install the

3. Install the

4. Install the

5. Install the

6. Install the

7. Follow the procedure in

After working inside your computer

Power button with fingerprint reader

Removing the power button

Prerequisites

1. Follow the procedure in

Before working inside your computer

2. Remove the

3. Remove the

4. Remove the

5. Remove the

6. Remove the

7. Remove the

NOTE:

The system board can be removed with the heat sink attached in order to simplify the procedure and preserve

the thermal bond between the system board and heat sink.

About this task

The following images indicate the location of the power button and provide a visual representation of the removal procedure.

Steps

1. Remove the two (M1.6x2.3) screws that secure the power-button assembly to the palm-rest and keyboard assembly.
2. Remove the power-button assembly from the computer.

Removing and installing components

Summary of Contents for Latitude 9330
















































































Search results

Summary of Contents for Latitude 9330

Reviews:

Related manuals for Latitude 9330

Brands by name

Popular brands

Dell Latitude 9330, Service Manual

Search results

Summary of Contents for Latitude 9330

Reviews:

Related manuals for Latitude 9330

Brands by name

Popular brands