Dell Latitude 9330 Service Manual Download Page 25 | Manualshive

Page: 25 / 79

background image

Steps

1. Remove the single (M2x2.5) screw that secures the WWAN-card bracket to the system board.
2. Lift and remove the WWAN-card bracket from the computer.
3. Using a plastic scribe, pry open the WWAN-card shield cover from the WWAN card.
4. Lift and remove the WWAN-card shield cover from the computer.
5. Disconnect the antenna cables from the connectors on the WWAN card.
6. Slide and remove the WWAN card from the WWAN-card slot.

NOTE:

When replacing the system board, the thermal-pad sticker underneath the WWAN card must be transferred to

the replacement system board.

NOTE:

For systems shipped with a 4G WWAN card, when replacing the system board, the WWAN-card support frame

must be transferred to the replacement system board.

Installing the WWAN card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the WWAN card and provide a visual representation of the installation procedure.

Removing and installing components

25

«
...
23
24
25
26
27
...
»

Summary of Contents for Latitude 9330
















































































Reviews:

No comments

Related manuals for Latitude 9330

Aspire 7740 Series

Brand: Acer Pages: 12

Aspire 7540 Series

Brand: Acer Pages: 12

Brand: Acer Pages: 326

Brand: Acer Pages: 1810

Brand: Acer Pages: 3

Brand: TONGFANG Pages: 44

Fieldmate Series

Brand: InfoCase Pages: 4

M190S World Warrior

Brand: EUROCOM Pages: 149

Intel PRO/100 SP

Brand: IBM Pages: 72

Brand: EUROCOM Pages: 90

Brand: Acer Pages: 99

Brand: Acer Pages: 104

ActionNote 800 Series

Brand: Epson Pages: 17

Brand: Haier Pages: 18

Brand: Dell Pages: 23

Brand: Dell Pages: 22

Brand: Lenovo Pages: 137

Brand: Lenovo Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands