Dell Latitude 7490 Service Manual Download Page 93

Page: 93 / 106

Table 8. System setup options—Display menu

Display

OSD Button Management

Disable OSD Buttons

Enable or disable the OSD (On-Screen Display) buttons on the computer.

Full Screen Logo

Enable or disable full screen logo.

By default, the option is not enabled.

Table 9. System setup options—Connection menu

Connection

Network Controller Configuration

Integrated NIC

Controls the on-board LAN controller.

By default, the

Enabled with PXE

option is enabled.

Wireless Device Enable

WLAN

Enable or disable the internal WLAN device

By default, the option enabled.

Bluetooth

Enable or disable the internal Bluetooth device

By default, the option enabled.

Enable UEFI Network Stack

Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.

By default, the option is enabled.

HTTPs Boot Feature

HTTPs Boot

Enable or disable the HTTPs Boot feature.

By default, the

HTTPs Boot

option is enabled.

HTTPs Boot Mode

With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.

By default, the

Auto Mode

option is enabled.

Table 10. System setup options—Power menu

Power

USB PowerShare

Enable USB PowerShare

Enable or disable the USB PowerShare.

By default, the

Enable USB PowerShare

option is disabled

USB Wake Support

Enable USB Wake Support

When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.

By default, the option is enabled.

AC Behavior

AC Recovery

Enables the system to turn on automatically, when AC is inserted.

By default, the

Power Off

option is enabled.

Block Sleep

Enables to block entering sleep (S3) mode in the operating system.

By default, the

Block Sleep

option is disabled.

Deep Sleep Control

Enable or disable the Deep Sleep mode support.

System setup

Summary of Contents for Latitude 7490











































































































Search results

Summary of Contents for Latitude 7490

Reviews:

Related manuals for Latitude 7490

Brands by name

Popular brands

Dell Latitude 7490, Service Manual

Search results

Summary of Contents for Latitude 7490

Reviews:

Related manuals for Latitude 7490

Brands by name

Popular brands