Installing the power board
1
Insert the power board into the slot.
2
Replace the M2.0x3.0 screws to secure the power board to the computer.
3
Connect the power board cable to the connector on the system board.
4
Affix the coin cell battery in the slot on the computer.
5
Install the:
a
b
c
d
NOTE:
To install both cards if equipped.
6
Follow the procedure in
After working inside your computer
.
Altavoz
Removing the speaker module
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler.
c
d
e
3
To disconnect the cables:
a Disconnect the LED board cable and smart card reader cable [1].
b Fold back the LED board and smart card reader cable back to allow access to the speaker cable [2].
18
Extracción e instalación de componentes
