Battery
4
WLAN
1
WWAN
1
EDP Bracket
2
USB Type C
2
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
Tarjeta Micro Secure Digital (micro-SD)
Removing the Micro Secure Digital (SD) Card
CAUTION:
Removing the Micro SIM card when the computer in on may cause data loss or damage the card. Ensure that the
computer is turned off.
NOTE:
Micro SIM card tray is available only for systems that are shipped with WWAN card.
1
Follow the procedure in
Before working inside your computer
.
2
Press in on the Micro SD card to release it from the computer.
3
Slide the Micro SD card out of the computer.
Installing the Micro Secure Digital (SD) Card
1
Slide the Micro SD into the slot until it clicks into place.
2
Follow the procedures in
After working inside your computer
.
Subscriber Identity Module (SIM) Card
Removing the micro SIM card or the micro SIM card tray
CAUTION:
Removing the micro SIM card when the computer is on may cause data loss or damage the card.
NOTE:
Micro SIM card tray is available only for systems that are shipped with WWAN card.
1
Insert a paperclip or a micro SIM card removal tool into the pinhole on the micro SIM card tray.
2
Use a scribe to pull the micro SIM card tray.
3
If a micro SIM card is available, remove the micro SIM card from the micro SIM card tray.
10
Extracción e instalación de componentes
