NOTE:
To remove both cards if equipped and no need to remove the blank filler.
c
d
NOTE:
Disconnect and remove the battery from the system board.
3
To remove the WLAN card:
a Remove the M2.0 x 3.0 screw that secures the metal bracket to the WLAN card [1].
b Lift the metal bracket [2].
c Disconnect the WLAN cables from the connectors on the WLAN card [3].
d Remove the WLAN card [4].
Installing the WLAN card
1
Insert the WLAN card into the connector on the system board.
2
Connect the WLAN cables to the connectors on the WLAN card.
3
Place the metal bracket and replace the M2.0 x 3.0 screw to secure WLAN card to the computer.
4
Install the:
a
b
c
d
NOTE:
To install both cards if equipped.
5
Follow the procedure in
After working inside your computer
.
Extracción e instalación de componentes
15
