5.
Connect the battery cable to the connector on the system board.
6.
Install the:
a.
base cover
7.
Follow the procedure in
After working inside your system
.
Removing the WWAN card
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
3.
Disconnect the battery cable from the connector on the system board [1].
4.
To remove the WWAN card:
a. Peel the aluminum foil until the folding line.
b. Remove the screw that secures the metal bracket to the WWAN card [1].
c. Remove the metal bracket [2].
d. Disconnect the WWAN cables from the connectors on the WWAN card [3].
e. Remove the WWAN card from the computer [4].
19
