Dell Latitude 7310 Service Manual Download

Page: 3 / 63

Chapter 1: Working on your computer...............................................................................................5

Safety instructions................................................................................................................................................................ 5

Working inside your computer....................................................................................................................................... 5
After working inside your computer.............................................................................................................................. 7

Chapter 2: Removing and installing components................................................................................8

Removing the base cover............................................................................................................................................... 9
Installing the base cover................................................................................................................................................ 12

Battery...................................................................................................................................................................................14

Solid-state drive................................................................................................................................................................... 16

Removing the solid state drive..................................................................................................................................... 16
Installing the solid state drive........................................................................................................................................18

WWAN card.......................................................................................................................................................................... 21

Removing the WWAN card...........................................................................................................................................21
Installing the WWAN card.............................................................................................................................................22

WLAN antennae bracket.................................................................................................................................................... 24

Removing the WLAN antenna bracket....................................................................................................................... 24
Installing the WLAN antenna bracket......................................................................................................................... 25

Palmrest antenna (Optional)..............................................................................................................................................26

Removing the Palmrest antenna (optional)............................................................................................................... 26
Installing the Palmrest antenna (optional)..................................................................................................................27

Heatsink assembly............................................................................................................................................................... 28

Removing the heatsink assembly................................................................................................................................ 28
Installing the heatsink assembly...................................................................................................................................29

Display assembly...................................................................................................................................................................31

Removing the display assembly.................................................................................................................................... 31
Installing the display assembly......................................................................................................................................32

Speakers............................................................................................................................................................................... 33

Removing the speaker.................................................................................................................................................. 33
Installing the speaker.....................................................................................................................................................34

Smart card reader............................................................................................................................................................... 35

Removing the smart card reader.................................................................................................................................35
Installing the smart card reader................................................................................................................................... 36

I/O board.............................................................................................................................................................................. 37

Removing the I/O board............................................................................................................................................... 37
Installing the I/O board................................................................................................................................................. 38

Power button with fingerprint reader...............................................................................................................................39

Removing the power button with fingerprint reader................................................................................................ 39

Contents

Summary of Contents for Latitude 7310
































































Search results

Summary of Contents for Latitude 7310

Reviews:

Related manuals for Latitude 7310

Brands by name

Popular brands

Dell Latitude 7310, Service Manual

Search results

Summary of Contents for Latitude 7310

Reviews:

Related manuals for Latitude 7310

Brands by name

Popular brands