Dell Latitude 7280 Owner'S Manual Download Page 58

Page: 58 / 77

Option

Description

Battery
Information

Displays the battery status health and whether the AC adapter is installed.

Boot Sequence

Allows you to change the order in which the computer attempts to find an operating system.

●

Diskette Drive

●

Internal HDD

●

USB Storage Device

●

CD/DVD/CD-RW Drive

●

Onboard NIC

Boot sequence
options

●

Windows boot manager

●

WindowsIns

Boot list options

●

Legacy

●

UEFI—selected by default

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the

Enable Legacy Option ROMs

disabled. Enable Attempt Legacy Boot is disabled by default.

UEFI boot path
security

●

Always, except internal HDD

●

Always

●

Never

Date/Time

Allows you to change the date and time.

System Configuration screen options

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options are:

●

Disabled

●

Enabled

●

Enable UEFI network stack: This option is enabled by default.

●

Enabled w/PXE

Parallel Port

Allows you to configure the parallel port on the docking station. The options are:

●

Disabled

●

AT: This option is enabled by default.

●

PS2

●

ECP

Serial Port

Allows you to configure the integrated serial port. The options are:

●

Disabled

●

COM1: This option is enabled by default.

●

COM2

●

COM3

●

COM4

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

●

Disabled

●

AHCI

●

RAID On: This option is enabled by default.

Drives

Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:

●

SATA-0

●

M.2 PCI-e SSD-0

●

SATA-2

SMART
Reporting

This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.

System Setup

Summary of Contents for Latitude 7280














































































Search results

Summary of Contents for Latitude 7280

Reviews:

Related manuals for Latitude 7280

Brands by name

Popular brands

Dell Latitude 7280, Owner'S Manual

Search results

Summary of Contents for Latitude 7280

Reviews:

Related manuals for Latitude 7280

Brands by name

Popular brands