Dell Latitude 5550 Page 61 Service Manual Download | Manualshive

Page: 61 / 63

background image

4. Click

Drivers & downloads

>

Find it myself

.

5. Select the operating system installed on your computer.
6. Scroll down the page and expand

BIOS

.

7. Click

Download

to download the latest version of the BIOS for your computer.

8. After the download is complete, navigate to the folder where you saved the BIOS update file.
9. Double-click the BIOS update file icon and follow the instructions on the screen.

Flea power release

About this task

Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been
disconnected from the system board. The following procedure provides the instructions on how to release the flea power:

Steps

1. Turn off your computer.
2. Remove the

NOTE:

The battery must be disconnected from the system board (see Step 3 in

removing base cover

3. Press and hold the power button for 15 seconds to drain the flea power.
4. Install the

.

5. Turn on your computer.

WiFi power cycle

About this task

If your computer is unable to access the Internet due to WiFi connectivity issues, a WiFi power cycle procedure may be performed. The
following procedure provides the instructions on how to conduct a WiFi power cycle:

NOTE:

Some ISPs (Internet Service Providers) provide a modem/router combo device.

Steps

1. Turn off your computer.
2. Turn off the modem.
3. Turn off the wireless router.
4. Wait for 30 seconds.
5. Turn on the wireless router.
6. Turn on the modem.
7. Turn on your computer.

Flashing BIOS (USB key)

Steps

1. Follow the procedure from step 1 to step 7 in "

Flashing the BIOS

" to download the latest BIOS setup program file.

2. Create a bootable USB drive. For more information see the knowledge base article

www.dell.com/support

3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press

F12

when the Dell logo is displayed on the screen.

6. Boot to the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

8. The

BIOS Update Utility

appears. Follow the instructions on the screen to complete the BIOS update.

Troubleshooting

61

«
...
59
60
61
62
63
»

Summary of Contents for Latitude 5550
































































Reviews:

No comments

Related manuals for Latitude 5550

StepNote XT Series

Brand: Everex Pages: 4

Brand: Gateway Pages: 168

Aspire V5-452PG

Brand: Acer Pages: 100

Brand: Craig Pages: 24

VERSA DAYLITE 3-CELL REMOVABLE BATTERY

Brand: NEC Pages: 6

Brand: NEC Pages: 6

Brand: Dell Pages: 25

Brand: Acer Pages: 86

Brand: Dell Pages: 23

Qosmio G30 G30-153

Brand: Toshiba Pages: 2

Qosmio M0026290

Brand: Toshiba Pages: 2

Brand: Toshiba Pages: 4

Brand: Toshiba Pages: 4

Brand: Toshiba Pages: 5

Brand: Toshiba Pages: 5

Brand: Toshiba Pages: 5

Qosmio X870 Series

Brand: Toshiba Pages: 164

Qosmio X70-A series

Brand: Toshiba Pages: 193

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands