Installing the Finger-Print Reader Board
1.
Insert the finger-print reader board into its place on the palmrest.
2.
Connect the finger-print reader cable to the finger-print reader board.
3.
Place the metal bracket on the finger-print reader board and tighten the screw to secure the finger-
print reader board.
4.
Install the:
a.
keyboard trim
b.
keyboard
c.
palmrest
d.
battery
e.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the LED Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
keyboard trim
d.
keyboard
e.
palmrest
3.
Perform the following steps to remove the LED board:
a. Disconnect the LED-board cable from its connector on the LED board [1] [2].
b. Remove the screw that secures the LED board to the palmrest [3].
c. Remove the LED board from the palmrest [4].
21
