5.
Push the palmrest to release and remove the palmrest from the computer [2].
Installing the Palmrest
1.
Place the palmrest on the computer.
2.
Connect the following cables to their connectors on the system board:
a. power board
b. LED board
c. USH board
d. touchpad board
3.
Tighten the screws at the front and back of the computer to secure the palmrest.
4.
Install the:
a.
keyboard
b.
keyboard trim
c.
battery
d.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
Removing the Power-Switch Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
keyboard trim
d.
keyboard
e.
palmrest
3.
Perform the following steps to remove the power-switch board from the palmrest:
a. Remove the screws that secure the power-switch board to the palmrest [1].
b. Remove the power-switch board from the palmrest [2].
16
