Installing the smart card cage
1
Insert the smart cage into the slot on the tablet.
2
Replace the M2.0 x 2.5 screws screws to secure the smart card cage to the tablet.
3
Connect the smart cable to the smart card module.
4
Install the:
a
b
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
5
Follow the procedure in
After working inside your tablet
.
Docking board
Removing the docking board
1
Follow the procedure in
Before working inside your tablet
2
Remove the:
a
NOTE:
uSIM card slot is available only on tablets shipping with WWAN module.
b
c
3
To release the docking board:
a Lift the latch and dDisconnect the docking board cable from the system board [1].
b Peel the docking board cable from adhesive on the tablet [2].
c Remove the M2.0 x 2.0 screws (2) securing the docking board bracket to the docking board [3].
d Lift the docking board from the tablet [4].
26
Removing and installing components
Summary of Contents for Latitude 5290 2-in-1
Page 1: ...Latitude 5290 2 in 1 Owner s Manual Regulatory Model T17G Regulatory Type T17G002 ...
Page 45: ...Disk driver Figure 4 Disk driver Technology and components 45 ...
Page 47: ...Storage controller drivers Figure 6 Storage controllers Technology and components 47 ...
Page 82: ...82 Software ...
