3.
Perform the following steps to remove the audio-connector board from the computer:
a) Disconnect the audio-connector board cable from the system board.
b) Remove the screw that secures the audio-connector board to the computer.
c) Lift and remove the audio-connector board from the computer.
Installing the Audio-Connector Board
1.
Place the audio-connector board in its slot on the computer.
2.
Tighten the screw to secure the audio-connector board to the computer.
3.
Connect the audio-connector board cable to the system board.
4.
Install the:
a) base cover
b) battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1.
Follow the procedures in
Before Working On Your Computer
.
2.
Remove the:
a) battery
b) base cover
20
Summary of Contents for Latitude 3340
Page 1: ...Dell Latitude 3340 Owner s Manual Regulatory Model P47G Regulatory Type P47G001 ...
Page 8: ...5 Turn on your computer 8 ...
Page 34: ...34 ...
Page 54: ...54 ...
