Figure 12. M.2 2230 SSD
2. Install the:
a)
b)
c)
3. Follow the procedure in
After working inside your computer
.
SSD bracket
Removing the SSD bracket
1.
NOTE:
This system has the option to fit two form factors (M.2 2242 and M.2 2230) SSD/eMMC cards. This is
achieved by removing, inverting, and installing the extender to an alternate location as marked on the palmrest.
Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
c)
d)
3. Remove the two M2.0x3.0 screws securing the SSD bracket to the palmrest [1].
4. Remove the SSD bracket from the palmrest [2].
Disassembly and reassembly
43
Summary of Contents for Latitude 3310
