c)
4. Follow the procedure in
After working inside your computer
.
Solid state drive (SSD)
Removing the SSD
1.
NOTE:
This system has the option to fit two form factors (M.2 2242 and M.2 2230) SSD/eMMC cards. This is
achieved by removing, inverting, and installing the extender to an alternate location as marked on the palmrest.
Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
c)
3. Remove the single M2.0x4.0 screw securing the SSD on the extender [1].
4. Remove the SSD from the M.2 slot on the system board [2].
Figure 11. M.2 2230 SSD
Installing the SSD
1. Install the SSD in the M.2 bracket [1] and secure it to the extender using the single M2.0x4.0 screw [2].
42
Disassembly and reassembly
Summary of Contents for Latitude 3310
