2. Align the hinges to the screw holes on the system board [1] and tighten the five M2.5x5.0 screws [2] to secure the display assembly to
the computer.
3. Route the antennae cable along the edges of the fan case [1] and stick a piece of tape [2] to secure it to the system board.
4. Connect the EDP cable [3], place the EDP bracket on the connector [4] , and secure it to system board using the single screw [5].
Disassembly and reassembly
73
Summary of Contents for Latitude 3310
