Dell Latitude 3310 Service Manual Download Page 23

Page: 23 / 107

•

Create BIOS configuration for client systems

•

Validate the BIOS configuration against the BIOS configuration of the host system

•

Export the customized BIOS configurations as a configuration file (.ini/.cctk), Self-Contained Executable (SCE), shell script, or report

NOTE:

To apply the configuration using Command Line Interface (CLI), run the required file (.ini , .cctk, or sce).

Accessing Command | Configure From a Windows System

Click

Start > All Programs > Dell > Command | Configure > Command Configure Command Wizard

Accessing Command | Configure From a Linux System

Navigate to the

/opt/Dell/toolkit/bin

directory.

Files And Folders of Command | Configure

The following table displays the files and folders of Command | Configure on a Windows system.

Table 7. Files And Folders configuration

Files/Folders

Description

Command | Configure Command
Prompt

Allows access to the Command | Configure command prompt.

Configuration Wizard

Allows access to the Command | Configure GUI.

Command | Configure WINPE

Allows access to the Windows PE scripts to create a bootable image. For more details, see the Dell
Command | Configure Installation Guide.

Uninstall

Uninstalls Command | Configure.

User’s Guide Online

Provides access to the Command | Configure online documentation.

Technology and components

Summary of Contents for Latitude 3310












































































































Search results

Summary of Contents for Latitude 3310

Reviews:

Related manuals for Latitude 3310

Brands by name

Popular brands

Dell Latitude 3310, Service Manual

Search results

Summary of Contents for Latitude 3310

Reviews:

Related manuals for Latitude 3310

Brands by name

Popular brands