Power connector port
Removing power connector port
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the power connector port:
a Disconnect the power connector cable from the connector on the system board [1].
b Remove the M.2.0x3.0 screws that secure the power connector port on the computer [2].
c Slide and lift the power connector port away from the computer [3].
Installing power connector port
1
Insert the power connector port into the slot on the computer.
2
Replace the M2.0x3.0 screws that secure the power connector port to the computer.
3
Connect the power connector cable to the connector on the system board.
4
Install the:
a
b
c
5
Follow the procedure in
After working inside your computer
.
Removing and installing components
15
