Dell Latitude 13 Service Manual Download Page 6

Page: 6 / 46

Dell Training Tool |

Latitude 13

Introduction

Product Overview

Chassis

Field Service Information

Safety Precautions

Service Issues

Interactive Teardown

Disassembly and Reassembly

Audio Board / Hard Drive

Palm Rest / LCD Assembly

Appendixes

Printer-Friendly Format

Hard Drive Cable Kit

CAUTION:

Please follow the

Safety Precautions

before removing any part from the system.

Installing The Hard Drive Cable Kit

1. Pre-Removal Instructions

Technicians need to remove the following components prior proceeding to installing the hard drive cable kit:

Remove the

Remove the

Remove the

Remove the

Establishing image.

Disconnect both end of the existing hard drive flex cable from the system board and hard drive connectors.

The hard drive flex cable is attached with a double sided tape. Peel off the cable from the system.

Remove the cloth tape from the card reader board edge.

NOTE:

Skip this step if the cloth tape is not there.

Summary of Contents for Latitude 13















































Search results

Summary of Contents for Latitude 13

Reviews:

Brands by name

Popular brands

Dell Latitude 13, Service Manual

Search results

Summary of Contents for Latitude 13

Reviews:

Brands by name

Popular brands